Longyixing Chemicals
Description
Exceed™ 1018 are ethylene 1-hexene copolymer resins. Flms made from Exceed™1018 resins have outstanding tensile impact strength andpuncture. These superior strength properties,along with excellent drawabilty, allow downgauging in bagapplicatiors. InPP is not intentionallyadded to Exceed™1018 resirs.
| Availability | Africa&Midde East | Europe | North America |
| Asia Pacific | Latin America | ||
| Additive | Exceed™ 1018MK: Antiblock: 5000 ppm;Slip: 1000 ppm; Processing Aid:Yes; Thermal Stabilizer:Yes | ||
| Exceed™ 1018MF:Antblock 4500 ppm; Slip:450 ppm; Processing Ait:Yes; ThemrmalStabilizer; Yes | |||
| Exceed™ 1018MA: Antiblock:No; Slip:No; Processing Aid:Yes; Thermal Stabilizer:Yes | |||
| Exceed™ 1018M):Antiblock:4500 ppm;Slip; No; Processing Aid:Yes; Thermal Stabilizer: Yes | |||
| Exceed™ 1018MB:Antblock:2500 ppm; Slip:800 ppm; Processing Aid:Yes;Thermal Stabilizer:Yes | |||
| Applications | Agricultural Film | Form Fil And Seal Packaging | OverwrapFilm |
| Bag in Box | Freezer Film | Packaging Films | |
| Barrier Food Packaging | GeneralPackaging | Premium Trash Bags | |
| Blown Fim | Heavy Duty Bags | Stand Up Pouches | |
| Blown Stretch Film | Industrial Packaging | Trash Bags | |
| Bread Bags | Lamination Fim | Trash Can Liners | |
| Food Packaging | Multilayer Packaging Film | ||
| Rewision Date | 07/12/2022 | ||
| Resin Properties | Typical Value (English) | Typical Value (SO) | Test Based On |
|---|---|---|---|
| Density/ Specific Gravity | 0.918 g/cm³ | 0.918 g/cm³ | ASTM D792 |
| Melt index(190°C/2.16kg) | 10 g/10 min | 1.0 g/10 min | ASTM D1238 |
| Peak Melting Temperature | 244 °F | 118 °C | ExxonMobl Method |
| Fim Properties | Typical Value (English) | Typical Value (SO) | Test Based On |
|---|---|---|---|
| Tensile Strengthat Yield MD | 1300 psi | 8.7 MPa | ASTM D882 |
| Tensile Strength at Yield TD | 1300 psi | 88 MPa | ASTM D882 |
| Tensile Strength at Break MD | 9400 psi | 60 MPa | ASTM D882 |
| Tensile Strength at Break TD | 8400 psi | 60 MPa | ASTM D882 |
| Bongation at Break MD | 500% | 500% | ASTM D882 |
| Bongation at Break TD | 640% | 640% | ASTM D882 |
| Secant Modulus MD- 1% Secant | 24000 psi | 170 MPa | ASTM D882 |
| Secant Modulus TD-1% Secant | 26000 psi | 180 MPa | ASTM D882 |
| Dart DropImpact | 550 g | 550 g | ASTM D1709A |
| Emendorf Tear Strength MD | 2209 g | 220 g | ASTM D1922 |
| Emendorf Tear Strength TD | 370 g | 3709 g | ASTM D1922 |
| Puncture Foree | 13 lbf | 59 N | ExxonMobil Method |
| Puncture Energy | 49 in-lbf | 5.5J | ExxonMobil Method |
| Optical Properties | Typical Value (English) | Typical Value (SI) | Test Based On |
|---|---|---|---|
| Goss(45°) | 43 | 43 | ASTM D2457 |
| Haze | 16% | 16% | ASTM D1003 |
Tis nonylphenolphosphite (TNPP)CAS#26523-78-4is not intentionally used by EoonMobil in this product. Although this product is notroutinely tested for its presence, based on product composition knowledge this substance is not expected to be present. However, the fact thatthis substance is not intertionally used by ExxonMobl in this product does not exdlude that trace levels of this substance may be present as a resultofthe specific charactenisties ofthe raw materials and/or of the manufacturing process.
This product is not intended for use in medical applications and should not be used in any such applications.
Contact your ExxonMobil Chemical Customer Service Representative for potentialfood contact application compliance (eg. FDA, EU, HPFB)
Flm(1 mi/254 micron) made ona 2.5inch (63.5 mm) blown film line with a2.5:1 blow-up ratio, amelt temperature of403°F(206℃),a 60mi(1.52 mm)die gapat a rate of 10lbs/hr/n die circumference(1.79kg/hr/cm).
Typical properties: these are not to be construed as specifications.
Product may not be availsble in one or more countries in the identified Availabilty regions.Please contactyour Sales Representative for ompleteCountry Availability
Longyixing Chemicals Co., Ltd
Longyixing Chemicals Co.,Ltd, with 10+ years of experience in TPU R&D and manufacturing, we proudly serve clients across 30+ countries. Our 20,000+ sqm advanced production facility houses 7 fully automated production lines, delivering an annual capacity of 50,000+ tons to meet your TPU needs efficiently and reliably.
