Longyixing Chemicals
Description:
• Good melt strength
• Good rigidity
• Exceptional ESCR
• Excellent low temperature impact strength
• Durability
Widely used in Shipping containers, Jerry cans, Fuel containers, Agricultural chemical tanks, Pallets, Automotive dunnage, Truck bedliners, Playground equipment.
• ASTM D4976 - PE 235
• FDA 21 CFR 177.1520(c) 3.2a, use conditions B through H per Table 2 of 21 CFR 176.170(c)
• UL94HB yellow card per UL file E349283
• NSF Standard 61 for potable water
• Listed in the Drug Master File
For a Material Safety Data Sheet (MSDS), visit our site at www.saudipolymers.com
| NOMINAL PHYSICAL PROPERTIES | English | Value (SI Units) | Method |
|---|---|---|---|
| Density | -- | 0.948 g/cm³ | ASTM D1505 |
| Flow Rate (HLMI, 190 °C / 21.6 kg) | -- | 10.0 g/10 min | ASTM D1238 |
| Tensile Strength at Yield, 2 in/min, Type IV bar | 3,600 psi | 25 MPa | ASTM D638 |
| Elongation at Break, 2 in/min, Type IV bar | 700% | 700% | ASTM D638 |
| Flexural Modulus, Tangent - 16:1 span:depth, 0.5 in/min | 175,000 psi | 1200 MPa | ASTM D790 |
| ESCR, Condition B (100% Igepal), F50 | >1000 hrs | >1000 hrs | ASTM D1693 |
| Durometer Hardness, Type D (Shore D) | 68 | 68 | ASTM D2240 |
| Vicat Softening Temperature, Loading 1, Rate A | 258 °F | 126 °C | ASTM D1525 |
| Heat Deflection Temperature, 66 psi, Method A | 173 °F | 78 °C | ASTM D648 |
| Brittleness Temperature, Type A, Type I specimen | <-103 °F | <-75 °C | ASTM D746 |
| Tensile Impact, Type S bar | 90 ft•lb/in² | 190 kJ/m² | ASTM D1822 |
Longyixing Chemicals Co., Ltd
Longyixing Chemicals Co.,Ltd, with 10+ years of experience in TPU R&D and manufacturing, we proudly serve clients across 30+ countries. Our 20,000+ sqm advanced production facility houses 7 fully automated production lines, delivering an annual capacity of 50,000+ tons to meet your TPU needs efficiently and reliably.
